Esp32 S3 1.91 Waveshare ESP32-S3 2.41inch AMOLED Touch Display Development Board, 600x450, 32-bit LX7 Dual-Core Processor, Onboard Accelerometer And Gyroscope Sensor, ESP32 With Display With Case Esp32 S3r8

Das ESP32 S3 Touch AMOLED 2.41 ist echt ein kleines Powerpaket. Der dual core Xtensa Prozessor rennt bis zu 240MHz, dazu gibt’s ordentlich Speicher onboard (16MB Flash und 8MB PSRAM) – damit kannst du richtig coole Projekte bauen, ohne ständig Platzprobleme zu haben Wi-Fi Bluetooth 5 Placa Desarrollo Waveshare ESP32-S3 Con Pantalla AMOLED Táctil 2.41 - Procesador Dual-core, WiFi, BT5, IMU Placa Desarrollo Esp32- s3 Onboard RST button, along with programmable BOOT and PWR buttons for customizable functionality and flexible development , Onboard 3., 7V MX1., 25 Lithium battery recharge/discharge header. Supports capacitive touch function, controlled via I2C interface, with interrupt support , Onboard 2., 41inch AMOLED display, QSPI interface, 600 450 resolution, 16., 7M color. Scheda Iot Esp32 S3 1.91 Waveshare ESP32-S3 2.41inch AMOLED Touch Display Development Board, 600x450, 32-bit LX7 Dual-Core Processor, Onboard Accelerometer And Gyroscope Sensor, ESP32 With Display With Case Esp32 S3r8 Microcontrollore Wi-fi The device allows switching to an external antenna by resoldering an onboard resistor. ESP32-S3-Touch-AMOLED-2., 41, standard version, without case. Built-in 512KB Static RAM and 384KB ROM, with onboard 16MB Flash and 8MB PStatic RAM. Onboard TF card slot, enabling external storage for pictures or files. Onboard UART and I2C SH1., 0 4PIN connectors, with a reserved 34PIN 2., 54mm pitch GPIO header for expandability , Supports 2., 4GHz Wi-Fi (802., 11 b/g/n) and BT 5 (LE), with an onboard antenna.